SUPER PURGE Floor Finish Solubilizer 4/1 Gal. Case (NCL1056-29)

Janitorial & Sanitation Supplies → Floor & Carpet Care → SUPER PURGE Floor Finish Solubilizer 4/1 Gal. Case (NCL1056-29)

SUPER PURGE Floor Finish Solubilizer 4/1 Gal. Case (NCL1056-29)

This Product is out of stock, a special order item,
or no longer available

If you need assistance with this item or finding a replacement product, please give us a call at 1-888-792-2166 or send an email to customer service.

Summary

A unique floor finish re-emulsifier and extra heavy-duty stripper, designed for use in heavy build up areas that have been high speed burnished. Comprised of synergistic solubilizers in combination with emulsifiers, chelating and anti-redeposition agents, and a new type of penetrant in a pH controlled base allow a speed and efficiency never before attainable. A unique floor finish re-emulsifier and extra heavy duty stripper, designed for use in heavy build up areas that have been high speed burnished.

** Please note: shipping lead time 3-7 business days

Full Description
Product Specs

Product Description

Code: 1056

Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case

Directions

Mop/Wet Vacuum Stripping System: Dilute SUPER PURGE™ with cold, hard or soft water for use. The amount of SUPER PURGE™ for each stripping job will depend upon the amount of finish build up on the floor.

Heavy Duty Buildup: 1 part solubilizer to 4 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 8 parts water.

Apply diluted solution of SUPER PURGE™ liberally to the floor, using an area small enough to complete in 20-30 minutes (to avoid drying). Allow SUPER PURGE™ to stand for 5 minutes, then pick up the liquified finish with a squeegee equipped wet vacuum. Repeat this procedure until the floor is completely stripped. Rinse thoroughly with clear water and mop or vacuum dry.

Floor Machine Stripping System:
Heavy Duty Buildup: 1 part solubilizer to 6 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 16 parts water.

Follow the manual directions above, except agitate well with a floor machine equipped with a stripping pad and remove solubilized finish with a wet vacuum and rinse.

Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.

Safety

DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
Precautionary statement:
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.